Precision Pocket Scale 250g x 0.1g from Scales-R.us

**Color of the scale case is black for our present stock
scales

- Range	: 0~250g
- Tare	: Unlimited
- Negative Weight	: Tare Function will set negative weight to 0 without add-on
- Tare upon turning on	: Allows tare up to max tare upon turn on, but this will not extend the
	measuring range on the scale
- Accuracy	: ± 0.1 % of reading ± 1 digit
- Resolution	: 0.1g
- Minimum Weight	: >1.0g
- Min. Add-on Wt.	: >1.0g
- Power	: Battery: 3 AAA Alkaline batteries (Supplied)
- Warm-up time	: 2 seconds or less
- Display after warm up	: "0.0"
- Auto Off	: Auto off after 2 minutes of non-use
- Display Features	: Error Messages: LO- -: low battery, O_Ld: Overload, _L- -: error in the load cell
- Low Power	: 7V ± 0.3V
- Temperature	: Good performance within -10 degree Centigrade to +45 degree Centigrade or 14⁰F to 113⁰F.
- Load Cell Body	: Material : 2024 – T4/T351 Aluminum Alloy

- Supplied Items: 3 Batteries (3 AAA batteries), calibration weights supplied, a tray for weighing
small objects.

- Load Cell Technology

The scale has been calibrated before the shipment, however accuracy may be affected by
various factors like gravity, shipment, handling and changes of temperature.
The supplied calibration weight will allow you to recalibrate the scale to the ultimate accuracy.

Protect the scale from excessive shocks, prolonged overload conditions, excessive
temperature changes and humidity. Do not attempt to pull the platform out.

Please use only high quality AAA Alkaline batteries .

Remembers the last weight unit used.

Ounces	Gram

Penny Weight	Troy Ounces

OPERATION

- Place Scale on a horizontal flat surface, press ON/OFF Switch to on or off the scale
- Wait until "0.0" is displayed
- Put the object's on the weighing platform
- Can weigh in four different mode (g, oz, dwt and Ozt). The mode of weighing can be tested by CAL / MODE
key

TARE WEIGHING

- Turn on scale as described above
- Place the "tare item" on the platform
- Press TARE and wait until "0.0" is displayed
- Add the "net-weight-item"
- Can tare any weight within the scale overload limit

WAY FOR CALIBRATION

- Press ON/OFF key to turn on the scale without anything on the platform.

- When display shows "0.00" in "g" measurement unit, press and hold still the CAL/MODE key for about 4 seconds till it shows "CAL" and subsequently displays "0.00", the scale has been switched into calibration mode. Press the CAL/MODE key again and the scale will display "25.00", put 25g on the platform and press CAL/MODE again, the LCD will display "CALF" shortly before turning into "50.00". (If the calibration weight is not correct or the weight has not been put on to the platform, the LCD will instead show "CAL E" indicating the calibration error). When it shows "50.00", place a 50g calibration weights on the platform, press CAL/MODE the LCD will display "CAL F" shortly before turning into 50.00g and enters into weighing ready normal mode.

Home | Back to Top | Back

If you want to print this page successfully, please set your printer to landscape format first

Postal Scales, Digital Postal Scales, Postal Mail Scales, Digital Postal Mail Scales, Postage Computing Scales, Rate Computing Scales, Scales Development, Electronic Scales, USB Scales, LCD Postal Scales, Scale Components, Scale Load Cell, Load Cell, OIML Load Cell, Postage Scales, Electronic Postage Scales, Digital Postage Scales, Shipping Scales, Parcel Scales, Internet Scales, Online Postage Scales, Postal Rate Change, Postage Rates, USA, Data Chip, Postal Rate Chip, Network Scales, Inventory Scales, Bottle Scales, Bar Manager Scale, Drink Inventory Scales, Custom Designed Scales, Digital Inventory Scales,
LAN connected Scales, Bluetooth enabled Scales